Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 1072-1085, June, 2026

Research Article

Atmospheric Water Harvesting in Arid Regions Using Solar-Regenerated Metal-Organic Framework-303 Coated onto Hierarchical Copper Foam

Layla Haddad¹*, Connor Walsh², Aarav Patel³

¹Department of Mechanical Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
²Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, Australia
³Department of Chemical Engineering, Indian Institute of Technology Delhi, New Delhi, India

Corresponding Author: Layla Haddad — [email protected]

Abstract

Fog collection fails in hyper-arid desert interiors where relative humidity remains below 25% throughout the year. We grew aluminum-based metal-organic framework-303 (MOF-303) crystals directly onto three-dimensional hierarchical copper foam to overcome poor thermal conductivity during solar desorption. The monolithic harvester captured atmospheric moisture at 18% relative humidity overnight and released pure liquid water under natural morning sunlight without external power. Field trials in the Rub' al Khali desert yielded 1.42 liters of WHO-compliant potable water per kilogram of MOF daily across 60 consecutive diurnal cycles.

Keywords: atmospheric water harvesting; metal-organic frameworks; desert humidity; solar desorption; copper foam; water scarcity

Manuscript Timeline: Received 11 May, 2026; Revised 09 June, 2026; Accepted 24 June, 2026; Published 30 June, 2026.

Citation: Haddad, L., Walsh, C., and Patel, A. (2026). Atmospheric Water Harvesting in Arid Regions Using Solar-Regenerated Metal-Organic Framework-303 Coated onto Hierarchical Copper Foam. Advanced Journal of Environmental Science and Technology, 17(6), pp. 1072-1085.