Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (8), pp. 083-096, August, 2026

Research Article

Direct Air Carbon Capture Using Aminopolymer-Functionalized Mesoporous Silica Monoliths Regenerated by Low-Grade Industrial Waste Heat

Elena Popescu¹*, Rajan Nair², David Schneider³

¹Department of Chemical Engineering, Polytechnic University of Bucharest, Bucharest, Romania
²Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai, India
³Department of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland

Corresponding Author: Elena Popescu — [email protected]

Abstract

Deploying direct air capture (DAC) at megaton scale requires structured contactors with low pressure drop and thermal regeneration temperatures compatible with abundant low-grade waste heat. We extruded honeycomb monoliths from mesoporous SBA-15 silica functionalized with linear poly(propylenimine) to prevent oxidative amine degradation. Under ambient air flow (420 ppm CO₂, 60% relative humidity), the monolith achieved a capture capacity of 2.15 mmol CO₂/g with rapid mass transfer kinetics. Steam-assisted vacuum desorption at 78 °C released 96% pure CO₂ while retaining 94% capacity across 250 cycles.

Keywords: direct air capture; structured monolith contactor; solid amine sorbent; low-grade waste heat; atmospheric carbon removal; mesoporous silica

Manuscript Timeline: Received 19 July, 2026; Revised 16 August, 2026; Accepted 28 August, 2026; Published 30 August, 2026.

Citation: Popescu, E., Nair, R., and Schneider, D. (2026). Direct Air Carbon Capture Using Aminopolymer-Functionalized Mesoporous Silica Monoliths Regenerated by Low-Grade Industrial Waste Heat. Advanced Journal of Environmental Science and Technology, 17(8), pp. 083-096.