ISSN 2756-3251
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 143-155, June, 2026
Research Article
Bioelectrochemical Sulfate Reduction and Selective Metal Sulfide Precipitation for Copper and Zinc Recovery from Metallurgical Smelter Effluents
Kofi Mensah¹*, Elena Petrova², Jian-Hao Wang³
¹Department of Materials Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana
²Department of Biotechnology, Delft University of Technology, Delft, Netherlands
³School of Environment, Harbin Institute of Technology, Harbin, China
Corresponding Author: Kofi Mensah — [email protected]
Abstract
Hydrometallurgical and pyrometallurgical smelter wastewaters contain elevated concentrations of sulfate and dissolved divalent heavy metals that generate voluminous hazardous hydroxide sludges when treated via conventional lime neutralization. This study investigates a two-stage bioelectrochemical reactor utilizing autotrophic sulfate-reducing bacteria (Desulfovibrio and Desulfobulbus spp.) colonized on carbon-felt cathodes to generate biogenic sulfide at controlled pH stages for selective metal recovery. Poised at -0.70 V vs. Ag/AgCl without external organic electron donors, the system reduced influent sulfate by 88.6% while selectively precipitating 99.1% of copper sulfide at pH 2.5 and 97.4% of zinc sulfide at pH 5.2. X-ray diffraction confirmed high-purity sphalerite and covellite precipitates suitable for direct smelter feed, eliminating secondary sludge disposal liabilities.
Keywords: bioelectrochemical systems; sulfate-reducing bacteria; selective metal recovery; smelter wastewater; biogenic sulfide; circular metallurgy
Manuscript Timeline: Received 12 May, 2026; Revised 06 June, 2026; Accepted 17 June, 2026; Published 30 June, 2026.
Citation: Mensah, K., Petrova, E., and Wang, J.-H. (2026). Bioelectrochemical Sulfate Reduction and Selective Metal Sulfide Precipitation for Copper and Zinc Recovery from Metallurgical Smelter Effluents. Advanced Journal of Environmental Science and Technology, 17(6), pp. 143-155.
Subscribe to read the full article: https://www.internationalscholarsjournals.org/subscribe-to-read