Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 118-129, June, 2026

Short Communication

Mycelium-Bound Agricultural Waste Composites as Biodegradable Thermal Insulation Panels: Hygrothermal Performance and End-of-Life Soil Compostability

Anika Verma¹*, Lukas Novotny², Chidinma Okeke³

¹Department of Architecture and Regional Planning, Indian Institute of Technology Kharagpur, Kharagpur, India
²Faculty of Civil Engineering, Czech Technical University in Prague, Prague, Czech Republic
³Department of Architecture, University of Nigeria, Enugu, Nigeria

Corresponding Author: Anika Verma — [email protected]

Abstract

Petrochemical foam building insulation materials such as expanded polystyrene entail high embodied carbon and persist as non-recyclable demolition waste. This study cultivates Ganoderma lucidum fungal mycelium on pasteurized rice straw and hemp hurd substrates to fabricate self-bonded, lightweight thermal insulation boards without synthetic formaldehyde resins. Exhibiting a dry bulk density of 112 kg/m3 and a thermal conductivity of 0.037 W/m·K, the bio-composites matched commercial mineral wool insulation performance while achieving Class B fire-retardant ratings via natural silicate rice-husk coatings. Buried in active agricultural soil at end-of-life, panels achieved 92% mass mineralization within 75 days without releasing toxic leachates, offering a carbon-negative building envelope material.

Keywords: mycelium bio-composites; sustainable building insulation; agricultural waste valorization; embodied carbon; biodegradability; circular construction

Manuscript Timeline: Received 20 May, 2026; Revised 13 June, 2026; Accepted 23 June, 2026; Published 30 June, 2026.

Citation: Verma, A., Novotny, L., and Okeke, C. (2026). Mycelium-Bound Agricultural Waste Composites as Biodegradable Thermal Insulation Panels: Hygrothermal Performance and End-of-Life Soil Compostability. Advanced Journal of Environmental Science and Technology, 17(6), pp. 118-129.