Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (5), pp. 307-319, May, 2026

Research Article

Atmospheric Water Harvesting in Arid Environments Using Solar-Regenerated Metal-Organic Framework Hydrogel Composites

Tariq Al-Harbi¹*, Nadia Kovalenko², Rodrigo Silva³

¹Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
²Department of Chemistry, University of Alberta, Edmonton, Canada
³Department of Chemical Engineering, State University of Campinas, Campinas, Brazil

Corresponding Author: Tariq Al-Harbi — [email protected]

Abstract

Water scarcity in hyper-arid regions demands decentralized freshwater production technologies capable of operating without surface water infrastructure or grid electricity. This study engineers a hygroscopic aluminum-fumarate metal-organic framework (MOF-303) embedded within a photothermal polypyrrole-crosslinked sodium alginate hydrogel matrix for continuous diurnal atmospheric water harvesting. Under arid ambient conditions of 20% relative humidity and 32 °C, the composite sorbed 0.68 g of water per gram of dry adsorbent overnight and released 93% of captured moisture within 75 minutes under natural sunlight (0.85 kW/m2). Multi-cycle outdoor field trials conducted over 45 consecutive days yielded 2.4 liters of potable water per kilogram of composite daily without structural degradation or ion leaching, demonstrating a low-cost water security solution for off-grid desert communities.

Keywords: atmospheric water harvesting; metal-organic frameworks; hygroscopic hydrogels; solar desalination; arid regions; water security

Manuscript Timeline: Received 12 April, 2026; Revised 10 May, 2026; Accepted 24 May, 2026; Published 31 May, 2026.

Citation: Al-Harbi, T., Kovalenko, N., and Silva, R. (2026). Atmospheric Water Harvesting in Arid Environments Using Solar-Regenerated Metal-Organic Framework Hydrogel Composites. Advanced in Environmental Science and Technology, 17(5), pp. 307-319.