Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (9), pp. 116-130, September, 2026

Research Article

Upcycled Waste Glass Fiber-Reinforced Polymer Wind Turbine Blades Converted into High-Strength Acoustic Barriers for Urban Railways

Declan Byrne¹*, Zainab Al-Kuwari², Mateus Silva³, Mei-Hua Zhou⁴, Henrik Solberg⁵

¹School of Civil Engineering, University of Galway, Galway, Ireland
²Department of Mechanical Engineering, Qatar University, Doha, Qatar
³Department of Civil Construction Engineering, University of Sao Paulo, Sao Paulo, Brazil
⁴College of Civil Engineering and Architecture, Zhejiang University, Hangzhou, China
⁵Department of Building and Environmental Technology, Norwegian University of Life Sciences, As, Norway

Corresponding Author: Declan Byrne — [email protected]

Abstract

Decommissioned glass fiber-reinforced polymer (GFRP) wind turbine blades resist mechanical shredding and pose major composite landfilling challenges worldwide. We sectioned retired turbine blades into structural sandwich cassettes filled with shredded GFRP fibrous wool and recycled crumb rubber to construct modular railway noise barriers. Acoustic testing demonstrated a sound transmission class of 38 dB and a noise reduction coefficient of 0.89 across wheel-rail rolling frequencies (400–2500 Hz). Life-cycle assessment confirmed a 69% reduction in embodied carbon compared to virgin aluminum and concrete railway barriers.

Keywords: wind turbine blade recycling; composite waste valorization; railway noise barrier; acoustic insulation; circular infrastructure; GFRP reuse

Manuscript Timeline: Received 17 August, 2026; Revised 14 September, 2026; Accepted 27 September, 2026; Published 30 September, 2026.

Citation: Byrne, D., Al-Kuwari, Z., Silva, M., Zhou, M.-H., and Solberg, H. (2026). Upcycled Waste Glass Fiber-Reinforced Polymer Wind Turbine Blades Converted into High-Strength Acoustic Barriers for Urban Railways. Advanced Journal of Environmental Science and Technology, 17(9), pp. 116-130.