Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 324-336, June, 2026

Research Article

Electrospun Metal-Organic Framework/Polyacrylonitrile Nanofiber Membranes for High-Efficiency Capture of Radioactive Iodine Vapor from Nuclear Off-Gas Streams

Jian-Wei Zhou¹*, Katarzyna Kowalska², Benjamin Foster³

¹School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China
²Department of Chemical Technology, Warsaw University of Technology, Warsaw, Poland
³School of Chemistry, University of Melbourne, Melbourne, Australia

Corresponding Author: Jian-Wei Zhou — [email protected]

Abstract

Volatile radioactive iodine isotopes (129I and 131I) generated during nuclear fuel reprocessing require high-capacity, moisture-resistant sorbents capable of operating under humid off-gas conditions without silver-zeolite degradation. This study fabricates flexible nanofiber membranes via electrospinning bismuth-thiolate-functionalized ZIF-8 metal-organic frameworks embedded within hydrophilic-hydrophobic balanced polyacrylonitrile fibers. Under dynamic breakthrough testing at 75 °C and 80% relative humidity, strong chemisorptive Bi–I coordination bonds yielded an iodine capture capacity of 642 mg/g with a decontamination factor exceeding 10^4. X-ray photoelectron spectroscopy confirmed irreversible formation of stable bismuth oxyiodide phases, preventing thermal or aqueous leaching during long-term geological waste immobilization.

Keywords: radioactive iodine capture; nuclear off-gas treatment; metal-organic frameworks; electrospun nanofibers; chemisorption; nuclear waste safety

Manuscript Timeline: Received 19 May, 2026; Revised 13 June, 2026; Accepted 23 June, 2026; Published 30 June, 2026.

Citation: Zhou, J.-W., Kowalska, K., and Foster, B. (2026). Electrospun Metal-Organic Framework/Polyacrylonitrile Nanofiber Membranes for High-Efficiency Capture of Radioactive Iodine Vapor from Nuclear Off-Gas Streams. Advanced Journal of Environmental Science and Technology, 17(6), pp. 324-336.