ISSN 2756-3251
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 840-854, June, 2026
Research Article
Direct Air Carbon Capture Using Moisture-Swing Quaternary Ammonium Resins Integrated into Passive Building Facades
Elena Popescu¹*, David Kowalski², Siti Rahmah³
¹Department of Environmental Engineering and Management, Gheorghe Asachi Technical University of Iasi, Iasi, Romania
²Department of Chemical and Biological Engineering, University of British Columbia, Vancouver, Canada
³Department of Chemical Engineering, Universiti Malaya, Kuala Lumpur, Malaysia
Corresponding Author: Elena Popescu — [email protected]
Abstract
Thermal regeneration in direct air capture (DAC) systems imposes severe energy penalties that hinder decentralized urban deployment. We embedded quaternary ammonium-functionalized ion-exchange resins into breathable terracotta facade louvers capable of capturing atmospheric CO₂ under dry ambient conditions and releasing concentrated gas upon exposure to rainwater or mist. Field monitoring over six months showed an average capture flux of 1.85 mol CO₂ per square meter daily without external thermal input. Desorbed gas reached 88% purity, enabling direct routing to rooftop hydroponic greenhouses for crop enrichment.
Keywords: direct air capture; moisture-swing sorbent; building-integrated carbon capture; ion-exchange resin; urban decarbonization; passive louvers
Manuscript Timeline: Received 15 May, 2026; Revised 14 June, 2026; Accepted 26 June, 2026; Published 30 June, 2026.
Citation: Popescu, E., Kowalski, D., and Rahmah, S. (2026). Direct Air Carbon Capture Using Moisture-Swing Quaternary Ammonium Resins Integrated into Passive Building Facades. Advanced Journal of Environmental Science and Technology, 17(6), pp. 840-854.
Subscribe to read the full article: https://www.internationalscholarsjournals.org/subscribe-to-read