ISSN 2756-3251
Advanced Journal of Environmental Science and Technology | Vol. 17 (9), pp. 276-290, September, 2026
DOI: 10.46882/2026.AJEST.170906
Research Article
Direct Air Capture of Carbon Dioxide Using Amine-Functionalized Mesoporous Silica Monoliths Regenerated via Low-Grade Industrial Waste Heat
Klara Novotna¹*, jin-Woo Park², Rafael Oliveira³
¹Department of Chemical Engineering, University of Chemistry and Technology Prague, Prague, Czech Republic
²Department of Energy Systems Engineering, Seoul National University, Seoul, South Korea
³Department of Mechanical Engineering, University of Sao Paulo, Sao Paulo, Brazil
Corresponding Author: Klara Novotna — [email protected]
Abstract
Energy-intensive thermal regeneration remains the primary economic barrier to scaling solid-sorbent direct air capture (DAC) technologies. We engineered honeycomb cordierite monoliths coated with tetraethylenepentamine-grafted SBA-15 silica capable of desorbing captured CO₂ at 75 °C. Under ambient air conditions (425 ppm CO₂, 60% relative humidity, 25 °C), the monoliths achieved a working adsorption capacity of 1.84 ± 0.07 mmol CO₂/g and a thermal regeneration energy requirement of 1.65 GJ/t CO₂. Continuous operation over 200 temperature-vacuum swing cycles demonstrated less than 4.2% capacity loss due to oxidative amine degradation.
Keywords: direct air capture; carbon dioxide adsorption; mesoporous silica; amine-functionalized sorbents; waste heat integration; climate mitigation
Manuscript Timeline: Received 18 August, 2026; Revised 17 September, 2026; Accepted 28 September, 2026; Published 30 September, 2026.
Citation: Novotna, K., Park, J.-W., and Oliveira, R. (2026). Direct Air Capture of Carbon Dioxide Using Amine-Functionalized Mesoporous Silica Monoliths Regenerated via Low-Grade Industrial Waste Heat. Advanced Journal of Environmental Science and Technology, 17(9), pp. 276-290.
Subscribe to read the full article: https://www.internationalscholarsjournals.org/subscribe-to-read