Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (11), pp. 196-210, November, 2026
DOI: 10.46882/2026.AJEST.171114

Research Article

Life Cycle Carbon and Water Footprint of Alternative Aviation Fuels Synthesized via Fischer-Tropsch Gasification of Forestry Residues

freja Lindholm¹*, Mateo Silva², Amina Diallo³, Rajesh Nair⁴

¹Department of Space, Earth and Environment, Chalmers University of Technology, Gothenburg, Sweden
²Department of Chemical Engineering, University of Sao Paulo, Sao Paulo, Brazil
³Department of Environmental Sciences, Cheikh Anta Diop University, Dakar, Senegal
⁴Department of Energy Science and Engineering, Indian Institute of Technology Madras, Chennai, India

Corresponding Author: Freja Lindholm — [email protected]

Abstract

Decarbonizing long-haul aviation requires sustainable aviation fuels (SAF) that avoid indirect land-use change and excessive freshwater consumption. We performed a spatially explicit cradle-to-wake life cycle assessment of Fischer-Tropsch jet fuel produced from logging residues integrated with bioenergy carbon capture and storage (BECCS). Incorporating carbon capture reduced net well-to-wake greenhouse gas emissions to -14.2 ± 3.1 g CO₂-eq/MJ, representing a 116% emission reduction relative to fossil Jet A-1 (89.0 g CO₂-eq/MJ). Closed-loop air-cooled condensation cut consumptive water footprint to 1.8 L H₂O/L SAF, ensuring viability in water-stressed forestry regions.

Keywords: sustainable aviation fuel; Fischer-Tropsch synthesis; forestry residues; bioenergy carbon capture; life cycle assessment; water footprint

Manuscript Timeline: Received 15 October, 2026; Revised 17 November, 2026; Accepted 20 November, 2026; Published 20 November, 2026.

Citation: Lindholm, F., Silva, M., Diallo, A., and Nair, R. (2026). Life Cycle Carbon and Water Footprint of Alternative Aviation Fuels Synthesized via Fischer-Tropsch Gasification of Forestry Residues. Advanced Journal of Environmental Science and Technology, 17(11), pp. 196-210.