Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 633-645, June, 2026

Research Article

Atmospheric Water Harvesting in Arid Regions Using Hygroscopic Calcium Chloride Embedded in Porous Sodium Polyacrylate Aerogels

Tariq Al-Hashimi¹*, Soo-Jin Park², Elena Vance³

¹Department of Mechanical and Nuclear Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
²Department of Materials Science and Engineering, Seoul National University, Seoul, South Korea
³Department of Hydrology and Atmospheric Sciences, University of Arizona, Tucson, United States

Corresponding Author: Tariq Al-Hashimi — [email protected]

Abstract

Severe freshwater scarcity in hyper-arid desert regions demands decentralized water harvesting technologies capable of operating at low relative humidity. We synthesized a super-hygroscopic aerogel by cross-linking sodium polyacrylate with cellulose nanofibers and infusing calcium chloride (CaCl₂) to prevent salt deliquescence leakage. At 30% relative humidity and 25 °C, the composite captured 1.48 g of atmospheric water per gram of dry sorbent within 8 hours of nighttime exposure. Passive solar heating under 1-sun irradiation released 92% of captured water within 90 minutes, yielding potable water compliant with WHO drinking standards.

Keywords: atmospheric water harvesting; hygroscopic aerogel; arid climate resilience; solar desalination; water scarcity; sorbent materials

Manuscript Timeline: Received 13 May, 2026; Revised 10 June, 2026; Accepted 21 June, 2026; Published 30 June, 2026.

Citation: Al-Hashimi, T., Park, S.-J., and Vance, E. (2026). Atmospheric Water Harvesting in Arid Regions Using Hygroscopic Calcium Chloride Embedded in Porous Sodium Polyacrylate Aerogels. Advanced Journal of Environmental Science and Technology, 17(6), pp. 633-645.