Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (10), pp. 90-104, October, 2026
DOI: 10.46882/2026.AJEST.171007

Research Article

Biogenic Strontium and Rare Earth Element Recovery from Phosphogypsum Waste Stacks Using Organic Acids Produced by Aspergillus niger

Bogdan Dragomir¹*, Naledi Khumalo², Mei-Xiu Zhou³, Fernando Rojas⁴

¹Faculty of Chemical Engineering and Environmental Protection, Gheorghe Asachi Technical University of Iasi, Iasi, Romania
²School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg, South Africa
³Department of Environmental Science and Engineering, Tsinghua University, Beijing, China
⁴Department of Mining and Metallurgical Engineering, University of Sonora, Hermosillo, Mexico

Corresponding Author: Bogdan Dragomir — [email protected]

Abstract

Phosphogypsum stockpiles generated by phosphate fertilizer manufacturing contain strategic rare earth elements (REEs) alongside radioactive impurities that prevent safe construction reuse. We utilized citric and oxalic acid lixiviants secreted by Aspergillus niger cultivated on sugarcane molasses to bioleach REEs from weathered phosphogypsum at 10% pulp density. After 7 days at 30 °C, bioleaching extracted 88.2 ± 2.4% of total REEs (neodymium, yttrium, and cerium) and 81.5% of strontium while immobilizing radium-226 in the solid residue. Selective oxalic acid precipitation yielded a mixed rare earth oxide concentrate of 93.7% purity.

Keywords: phosphogypsum valorization; rare earth elements; bioleaching; Aspergillus niger; organic acids; circular mining

Manuscript Timeline: Received 03 September, 2026; Revised 09 October, 2026; Accepted 24 October, 2026; Published 31 October, 2026.

Citation: Dragomir, B., Khumalo, N., Zhou, M.-X., and Rojas, F. (2026). Biogenic Strontium and Rare Earth Element Recovery from Phosphogypsum Waste Stacks Using Organic Acids Produced by Aspergillus niger. Advanced Journal of Environmental Science and Technology, 17(10), pp. 90-104.