ISSN 2756-3251
Advanced Journal of Environmental Science and Technology | Vol. 17 (9), pp. 131-144, September, 2026
Research Article
Direct Air Carbon Capture Using Potassium Carbonate-Impregnated Activated Carbon Fibers Regenerated by Low-Voltage Joule Heating
Katarzyna Nowak¹*, Rajesh Kumar², Connor Walsh³
¹Department of Chemical and Process Engineering, Warsaw University of Technology, Warsaw, Poland
²Department of Chemical Engineering, Indian Institute of Technology Delhi, New Delhi, India
³Department of Chemical Engineering, Monash University, Melbourne, Australia
Corresponding Author: Katarzyna Nowak — [email protected]
Abstract
Indirect steam heating in solid-sorbent direct air capture units suffers from slow thermal ramp rates and substantial heat losses to reactor vessels. We impregnated electrically conductive pitch-based activated carbon fiber cloths with potassium carbonate ((text{K}_2text{CO}_3)) nanoparticles to enable rapid direct electrothermal Joule heating regeneration. After capturing atmospheric (text{CO}_{2}) (420 ppm) at 65% relative humidity, applying 3.5 V heated the sorbent cloth to 95 °C within 45 seconds, releasing 97.4% pure (text{CO}_{2}). Rapid cyclic operation boosted daily (text{CO}_{2}) productivity threefold while cutting thermal energy demand by 44%.
Keywords: direct air capture; Joule heating regeneration; activated carbon fibers; potassium carbonate; electrothermal desorption; carbon removal
Manuscript Timeline: Received 20 August, 2026; Revised 17 September, 2026; Accepted 28 September, 2026; Published 30 September, 2026.
Citation: Nowak, K., Kumar, R., and Walsh, C. (2026). Direct Air Carbon Capture Using Potassium Carbonate-Impregnated Activated Carbon Fibers Regenerated by Low-Voltage Joule Heating. Advanced Journal of Environmental Science and Technology, 17(9), pp. 131-144.
Subscribe to read the full article: https://www.internationalscholarsjournals.org/subscribe-to-read