Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 1261-1275, June, 2026

Research Article

Selective Catalytic Reduction of Nitrogen Oxides at Low Temperatures Using Manganese-Cerium Oxide Supported on Acid-Activated Bentonite Clay

Ewa Kowalczyk¹*, Rashid Al-Maktoum²

¹Faculty of Chemistry, Jagiellonian University, Krakow, Poland
²Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates

Corresponding Author: Ewa Kowalczyk — [email protected]

Abstract

Industrial glass furnaces and biomass boilers emit exhaust gases below 200 °C, where conventional vanadium-based selective catalytic reduction (SCR) catalysts exhibit poor activity and suffer from sulfur poisoning. We synthesized low-cost manganese-cerium mixed oxide catalysts dispersed onto acid-activated natural bentonite clay for low-temperature ammonia-SCR. The catalyst achieved 97.6% NOₓ conversion with >95% N₂ selectivity across a broad temperature window of 120–240 °C. Surface acid sites on the bentonite support suppressed ammonium bisulfate deposition, maintaining 92% NOₓ removal efficiency even in the presence of 100 ppm SO₂ and 10% water vapor.

Keywords: low-temperature SCR; nitrogen oxides; manganese-cerium oxide; bentonite clay; flue gas denitrification; sulfur resistance

Manuscript Timeline: Received 13 May, 2026; Revised 10 June, 2026; Accepted 25 June, 2026; Published 30 June, 2026.

Citation: Kowalczyk, E., and Al-Maktoum, R. (2026). Selective Catalytic Reduction of Nitrogen Oxides at Low Temperatures Using Manganese-Cerium Oxide Supported on Acid-Activated Bentonite Clay. Advanced Journal of Environmental Science and Technology, 17(6), pp. 1261-1275.