Advanced Journal of Environmental Science and Technology

ISSN 2756-3251

Advanced Journal of Environmental Science and Technology | Vol. 17 (10), pp. 150-164, October, 2026
DOI: 10.46882/2026.AJEST.171011

Research Article

Solar-Driven Interfacial Evaporator Fabricated from Carbonized Loofah Sponge and Molybdenum Disulfide for Zero-Liquid-Discharge Hypersaline Brine Treatment

Oluwaseun Adebayo¹*, Zhi-Qiang Liu², Monique Laurent³, Kofi Mensah-Bonsu⁴

¹Department of Mechanical Engineering, Covenant University, Ota, Nigeria
²School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan, China
³Department of Materials Science, University of Lyon, Lyon, France
⁴Department of Chemical Engineering, University of Mines and Technology, Tarkwa, Ghana

Corresponding Author: Oluwaseun Adebayo — [email protected]

Abstract

Salt crystallization fouling rapidly degrades solar steam generation rates during continuous desalination of industrial reverse-osmosis brine concentrates. We engineered a 3D hydrophilic solar evaporator by anchoring flower-like MoS₂ nanosheets onto carbonized natural loofah sponge channels with directional salt-rejection pathways. Under one-sun illumination (1.0 kW/m²) using 20 wt% NaCl brine, the evaporator sustained a freshwater evaporation rate of 2.68 ± 0.09 kg/m²/h and a solar-to-vapor conversion efficiency of 91.4%. Precipitated sodium chloride crystals self-exfoliated along the outer rim overnight, maintaining clog-free operation across 30 consecutive diurnal cycles.

Keywords: solar interfacial evaporation; zero liquid discharge; hypersaline brine; salt rejection; molybdenum disulfide; sustainable desalination

Manuscript Timeline: Received 10 September, 2026; Revised 15 October, 2026; Accepted 27 October, 2026; Published 31 October, 2026.

Citation: Adebayo, O., Liu, Z.-Q., Laurent, M., and Mensah-Bonsu, K. (2026). Solar-Driven Interfacial Evaporator Fabricated from Carbonized Loofah Sponge and Molybdenum Disulfide for Zero-Liquid-Discharge Hypersaline Brine Treatment. Advanced Journal of Environmental Science and Technology, 17(10), pp. 150-164.