ISSN 2756-3251
Advances in Environmental Science and Technology | ISSN 2756-3278 | Vol. 17 (4), pp. 060-071, April, 2026
Research Article
Bioleaching and Selective Hydrometallurgical Recovery of Critical Rare Earth Elements from End-of-Life Electronic Waste
Lukas Weber¹*, Thabo Mokoena², Ji-Hoon Park³
¹Department of Environmental Process Engineering, Technical University of Munich, Munich, Germany
²Department of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg, South Africa
³Department of Resources Recycling, Korea University, Seoul, South Korea
Corresponding Author: Lukas Weber — [email protected]
Abstract
Conventional pyrometallurgical recycling of electronic waste consumes intensive energy and fails to recover rare earth elements (REEs) embedded in permanent magnets and fluorescent phosphors. This study investigates a two-stage circular hydrometallurgical process combining organic-acid bioleaching using Gluconobacter oxydans with selective ionic-liquid solvent extraction to recover neodymium, dysprosium, and yttrium from shredded hard disk drives and display panels. Under optimized pulp density and pH conditions, biogenic gluconic acid achieved 91% leaching efficiency for neodymium and 87% for dysprosium within 72 hours at ambient temperature. Subsequent extraction using task-specific phosphonium ionic liquids yielded high-purity rare earth oxides (>98.5%) while allowing five closed-loop regeneration cycles of the extractant without significant capacity loss. Comparative environmental impact assessment demonstrated a 62% reduction in global warming potential and 74% lower acidifying emissions compared to virgin mining and conventional acid roasting, offering a scalable pathway for urban mining.
Keywords: electronic waste; bioleaching; rare earth elements; hydrometallurgy; urban mining; circular resource recovery
Manuscript Timeline: Received 14 February, 2026; Revised 30 March, 2026; Accepted 13 April, 2026; Published 21 April, 2026.
Citation: Weber, L., Mokoena, T., and Park, J. H. (2026). Bioleaching and Selective Hydrometallurgical Recovery of Critical Rare Earth Elements from End-of-Life Electronic Waste. Advances in Environmental Science and Technology, 17(4), pp. 060-071.
Advances in Environmental Science and Technology | ISSN 2756-3278 | Vol. 17 (4), pp. 048-059, April, 2026
Review Article
Microplastic Transport, Trophic Transfer, and Plastisphere Microbial Ecology in Mangrove and Estuarine Ecosystems
Nurul Aina Zulkifli¹*, João Pedro Almeida², Fatima Zahra Bennani³
¹Institute of Ocean and Earth Sciences, Universiti Malaya, Kuala Lumpur, Malaysia
²Department of Marine Sciences, Federal University of Pernambuco, Recife, Brazil
³Department of Biology, Mohammed V University, Rabat, Morocco
Corresponding Author: Nurul Aina Zulkifli — [email protected]
Abstract
Mangrove forests and estuaries act as critical ecological buffers between terrestrial watersheds and open oceans, yet they increasingly serve as long-term sinks for microplastic debris. This review synthesizes global field surveys and mesocosm studies examining polymer distribution, hydrodynamic trapping mechanisms, and biological interactions within tropical and subtropical coastal wetlands. Analysis of sediment cores and benthic biota reveals that complex root architectures reduce tidal flow velocities, accelerating the deposition of high-density polymers and tire-wear particles. Furthermore, microplastic surfaces rapidly develop distinct microbial biofilms—termed the plastisphere—that harbor hydrocarbon-degrading bacteria alongside pathogenic species and antibiotic resistance genes. Evidence confirms trophic transfer from deposit-feeding invertebrates to commercially harvested fish and crustaceans, raising food safety concerns for coastal communities. The paper highlights analytical gaps in nanoplastic quantification and calls for standardized sampling protocols coupled with upstream plastic waste interception policies.
Keywords: microplastics; mangrove ecosystems; plastisphere; trophic transfer; estuarine pollution; coastal conservation
Manuscript Timeline: Received 20 February, 2026; Revised 28 March, 2026; Accepted 11 April, 2026; Published 19 April, 2026.
Citation: Zulkifli, N. A., Almeida, J. P., and Bennani, F. Z. (2026). Microplastic Transport, Trophic Transfer, and Plastisphere Microbial Ecology in Mangrove and Estuarine Ecosystems. Advances in Environmental Science and Technology, 17(4), pp. 048-059.
Advances in Environmental Science and Technology | ISSN 2756-3278 | Vol. 17 (4), pp. 036-047, April, 2026
Research Article
Direct Air Capture Integrated with Geothermal Energy: Thermodynamic Efficiency and Life-Cycle Carbon Accounting
Gunnar Sigurdsson¹*, Hannah O'Connor², Mei-Ling Chen³
¹Faculty of Industrial Engineering, Mechanical Engineering and Computer Science, University of Iceland, Reykjavik, Iceland
²Department of Earth and Environmental Engineering, Columbia University, New York, USA
³Department of Energy and Resources Engineering, National Taiwan University, Taipei, Taiwan
Corresponding Author: Gunnar Sigurdsson — [email protected]
Abstract
Scaling direct air capture (DAC) to gigatonne removal levels requires abundant low-carbon thermal energy to minimize net carbon penalties and operational expenditures. This study evaluates the thermodynamic performance and cradle-to-grave life-cycle carbon balance of solid-sorbent temperature-vacuum swing DAC coupled directly with medium-enthalpy geothermal brine systems. Using operational data from a 4,000-tonne-per-year pilot facility alongside process simulation modeling, we quantified exergy losses, water consumption, and mineral carbonation storage efficiency in basaltic formations. Results demonstrate that utilizing cascaded geothermal heat reduces external electricity demand by 54% and achieves a net carbon removal efficiency of 93.4% over a 25-year plant lifespan. Sensitivity analyses reveal that sorbent degradation rates and non-condensable gas reinjection protocols represent the primary drivers of levelized capture costs. The study establishes thermodynamic and geological siting criteria for deploying geothermal-powered DAC hubs across volcanic and rift-zone regions worldwide.
Keywords: direct air capture; geothermal energy; carbon dioxide removal; life-cycle assessment; mineral carbonation; thermodynamic efficiency
Manuscript Timeline: Received 10 February, 2026; Revised 25 March, 2026; Accepted 09 April, 2026; Published 17 April, 2026.
Citation: Sigurdsson, G., O'Connor, H., and Chen, M. (2026). Direct Air Capture Integrated with Geothermal Energy: Thermodynamic Efficiency and Life-Cycle Carbon Accounting. Advances in Environmental Science and Technology, 17(4), pp. 036-047.
Advances in Environmental Science and Technology | ISSN 2756-3278 | Vol. 17 (4), pp. 024-035, April, 2026
Review Article
Biochar-Modified Constructed Wetlands for Simultaneous Nutrient Recovery and Heavy Metal Immobilization in Agricultural Runoff
Astrid Lindqvist¹*, Rajesh Kulkarni², Camila Morales³
¹Department of Aquatic Sciences and Assessment, Swedish University of Agricultural Sciences, Uppsala, Sweden
²Department of Environmental Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India
³Department of Environmental Engineering, National University of Colombia, Bogotá, Colombia
Corresponding Author: Astrid Lindqvist — [email protected]
Abstract
Agricultural non-point source runoff introduces excess nitrogen, phosphorus, and trace heavy metals into freshwater watersheds, driving eutrophication and bioaccumulation. This review examines how integrating engineered biochar substrates into horizontal and vertical subsurface flow constructed wetlands enhances pollutant removal and resource recovery. Drawing on global experimental trials across temperate, tropical, and arid climates, the analysis evaluates how feedstock selection, pyrolysis temperature, and chemical activation govern biochar porosity, cation exchange capacity, and microbial biofilm colonization. Evidence indicates that iron- and magnesium-modified biochars increase phosphate adsorption by up to 65% while immobilizing cadmium, lead, and arsenic through surface complexation and precipitation. Furthermore, spent nutrient-saturated biochar can be safely repurposed as a slow-release soil amendment when metal concentrations remain below regulatory thresholds. The review identifies key operational constraints, including hydraulic clogging, greenhouse gas trade-offs during denitrification, and regeneration protocols, proposing standardized design guidelines for circular watershed management.
Keywords: constructed wetlands; engineered biochar; agricultural runoff; heavy metal immobilization; nutrient recovery; circular economy
Manuscript Timeline: Received 18 February, 2026; Revised 22 March, 2026; Accepted 07 April, 2026; Published 15 April, 2026.
Citation: Lindqvist, A., Kulkarni, R., and Morales, C. (2026). Biochar-Modified Constructed Wetlands for Simultaneous Nutrient Recovery and Heavy Metal Immobilization in Agricultural Runoff. Advances in Environmental Science and Technology, 17(4), pp. 024-035.
Advances in Environmental Science and Technology | ISSN 2756-3278 | Vol. 17 (4), pp. 012-023, April, 2026
Research Article
Machine Learning-Driven Air Quality Forecasting and Emission Source Apportionment in Rapidly Urbanizing Megacities
Chidinma Eze¹*, Mateo Silva², Sora Takahashi³
¹Department of Environmental Management, University of Lagos, Lagos, Nigeria
²Department of Atmospheric Sciences, University of Chile, Santiago, Chile
³Department of Urban Environmental Engineering, Kyoto University, Kyoto, Japan
Corresponding Author: Chidinma Eze — [email protected]
Abstract
Rapid urbanization and industrial expansion have intensified fine particulate matter (PM2.5) and tropospheric ozone pollution across developing and emerging megacities. This study develops a hybrid deep-learning framework combining graph neural networks with positive matrix factorization to forecast multi-pollutant concentrations and apportion emission sources at neighborhood resolution. Using three years of high-frequency sensor data, meteorological reanalyses, and satellite aerosol optical depth records from Lagos, Santiago, and Tokyo, the model was evaluated against conventional chemical transport simulations. The hybrid architecture improved 48-hour PM2.5 prediction accuracy by 28% while accurately isolating contributions from vehicular exhaust, biomass burning, construction dust, and industrial plumes. Spatial vulnerability mapping revealed that low-income transit corridors experience disproportionate peak exposures during stagnant atmospheric boundary layer events. These findings demonstrate that integrating low-cost Internet-of-Things sensor networks with interpretable machine learning provides municipal authorities with a cost-effective decision-support tool for targeted emission controls and real-time public health advisories.
Keywords: air quality forecasting; source apportionment; machine learning; urban air pollution; fine particulate matter; environmental sensing
Manuscript Timeline: Received 05 February, 2026; Revised 14 March, 2026; Accepted 04 April, 2026; Published 12 April, 2026.
Citation: Eze, C., Silva, M., and Takahashi, S. (2026). Machine Learning-Driven Air Quality Forecasting and Emission Source Apportionment in Rapidly Urbanizing Megacities. Advances in Environmental Science and Technology, 17(4), pp. 012-023.
Advances in Environmental Science and Technology | ISSN 2756-3278 | Vol. 17 (4), pp. 001-011, April, 2026
Review Article
Nanomaterial-Enabled Photocatalysis for the Degradation of Emerging Per- and Polyfluoroalkyl Substances in Industrial Wastewater
Tariq Al-Mansoor¹*, Elena Rostova², Kwame Boateng³
¹Department of Environmental Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
²Institute of Physical Chemistry, Lomonosov Moscow State University, Moscow, Russia
³Department of Civil and Environmental Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana
Corresponding Author: Tariq Al-Mansoor — [email protected]
Abstract
Per- and polyfluoroalkyl substances (PFAS) persist in aquatic ecosystems due to the exceptional strength of carbon-fluorine bonds, posing severe ecological and human health risks. This review evaluates recent breakthroughs in engineered nanomaterial photocatalysts—including bismuth-based oxyhalides, boron nitride composites, and titanium dioxide heterojunctions—designed to mineralize recalcitrant PFAS in complex industrial effluents. By synthesizing findings from bench-scale reactors, pilot studies, and kinetic modeling across Asia, Europe, and North America, the paper compares degradation pathways, defluorination efficiencies, and reactive species generation under solar and ultraviolet irradiation. Results show that surface-modified heterojunctions substantially outperform conventional single-phase catalysts by suppressing electron-hole recombination and enhancing hydrophobic adsorption of long- and short-chain PFAS. However, operational challenges remain, including catalyst fouling by natural organic matter, energy consumption, toxic intermediate formation, and nanoparticle recovery from treated water. The review outlines reactor design improvements, magnetic separation strategies, and life-cycle cost benchmarks required to transition photocatalytic PFAS remediation from laboratory validation to full-scale municipal and industrial deployment.
Keywords: PFAS remediation; photocatalysis; engineered nanomaterials; industrial wastewater; defluorination; advanced oxidation processes
Manuscript Timeline: Received 12 February, 2026; Revised 19 March, 2026; Accepted 02 April, 2026; Published 10 April, 2026.
Citation: Al-Mansoor, T., Rostova, E., and Boateng, K. (2026). Nanomaterial-Enabled Photocatalysis for the Degradation of Emerging Per- and Polyfluoroalkyl Substances in Industrial Wastewater. Advances in Environmental Science and Technology, 17(4), pp. 001-011.