ISSN 2756-3251
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 389-401, June, 2026
Research Article
Remote Sensing and Machine Learning Assessment of Mangrove Forest Recovery and Coastal Storm Surge Attenuation Following Community-Based Ecological Restoration
Siti Rahmah¹*, Oluwaseun Adeyemi², Camila Herrera³
¹Institute of Ocean and Earth Sciences, Universiti Malaya, Kuala Lumpur, Malaysia
²Department of Marine Sciences, University of Lagos, Lagos, Nigeria
³Department of Coastal Engineering, National University of Colombia, Medellín, Colombia
Corresponding Author: Siti Rahmah — [email protected]
Abstract
Restoring degraded coastal mangrove belts provides nature-based storm surge protection, yet long-term structural recovery and wave-attenuation performance across community-managed restoration projects remain inconsistently monitored. Integrating 15-year Sentinel-1 C-band synthetic aperture radar backscatter, ICESat-2 spaceborne LiDAR canopy height profiles, and SWAN-ADCIRC coupled wave-surge modeling across 14 restored mangrove coastlines in Southeast Asia and West Africa, this study evaluated biophysical recovery trajectories. Community-led hydrological rehabilitation utilizing native Rhizophora and Avicennia species achieved 84% canopy closure and 11.4-meter mean tree height within 10 years—outperforming monoculture seaward plantings that suffered 62% seedling mortality. Mature restored mangrove belts (300 meters wide) attenuated incoming cyclone wave heights by 74% and reduced peak storm surge water levels by 0.68 meters, protecting adjacent coastal settlements.
Keywords: mangrove restoration; coastal protection; storm surge attenuation; spaceborne LiDAR; synthetic aperture radar; nature-based solutions
Manuscript Timeline: Received 27 May, 2026; Revised 20 June, 2026; Accepted 28 June, 2026; Published 30 June, 2026.
Citation: Rahmah, S., Adeyemi, O., and Herrera, C. (2026). Remote Sensing and Machine Learning Assessment of Mangrove Forest Recovery and Coastal Storm Surge Attenuation Following Community-Based Ecological Restoration. Advanced Journal of Environmental Science and Technology, 17(6), pp. 389-401.
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 376-388, June, 2026
Research Article
Circular Upcycling of Waste Wind Turbine Blades via Solvolytic Resin Depolymerization and Recovered Glass Fiber Reinforcement in Recycled Polypropylene Composites
Henrik Lindholm¹*, Meera Subramanian², Alejandro Silva³
¹Department of Wind and Energy Systems, Technical University of Denmark, Roskilde, Denmark
²Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Roorkee, India
³Department of Mechanical Engineering, National Autonomous University of Mexico, Mexico City, Mexico
Corresponding Author: Henrik Lindholm — [email protected]
Abstract
Decommissioned glass-fiber-reinforced epoxy wind turbine blades pose a growing composite waste challenge because thermoset polymer matrices resist conventional remelting. This study demonstrates a mild, catalyst-assisted supercritical ethanol-water solvolysis process (260 °C, 90 minutes) that selectively cleaves amine-cured epoxy crosslinks to reclaim clean, full-length glass fibers alongside reusable bisphenol-based oligomers. Recovered glass fibers retained 93% of virgin tensile strength and were compounded at 30 wt% loading into post-consumer recycled polypropylene using maleic-anhydride coupling agents. The resulting thermoplastic composites exhibited a 165% increase in flexural modulus suitable for structural automotive and railway sleepers, while cradle-to-gate life-cycle assessment showed a 67% reduction in carbon footprint compared to landfilling and virgin fiberglass manufacturing.
Keywords: wind turbine blade recycling; chemical solvolysis; glass fiber recovery; thermoset composites; circular economy; life-cycle assessment
Manuscript Timeline: Received 25 May, 2026; Revised 18 June, 2026; Accepted 27 June, 2026; Published 30 June, 2026.
Citation: Lindholm, H., Subramanian, M., and Silva, A. (2026). Circular Upcycling of Waste Wind Turbine Blades via Solvolytic Resin Depolymerization and Recovered Glass Fiber Reinforcement in Recycled Polypropylene Composites. Advanced Journal of Environmental Science and Technology, 17(6), pp. 376-388.
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 363-375, June, 2026
Research Article
Microbiome-Assisted Phytostabilization of Arsenic- and Antimony-Contaminated Mine Tailings Using Native Metallophyte Grasses and Siderophore-Producing Rhizobacteria
Gabriel Morales¹*, Chidinma Ndlovu², Marek Dvorak³
¹Department of Environmental Sciences, University of Chile, Santiago, Chile
²Department of Plant and Soil Sciences, University of Pretoria, Pretoria, South Africa
³Department of Experimental Plant Biology, Charles University, Prague, Czech Republic
Corresponding Author: Gabriel Morales — [email protected]
Abstract
Abandoned polymetallic mine tailings in semi-arid regions generate windblown arsenic- and antimony-laden dust and acid leachate that threaten surrounding agricultural valleys. Over a 16-month field trial on sulfidic tailings containing 1,850 mg/kg arsenic and 620 mg/kg antimony, this study inoculated the native metal-tolerant bunchgrass Stipa ichu with a consortium of siderophore- and exopolysaccharide-producing Pseudomonas and Bacillus rhizobacteria alongside municipal compost. Bioaugmentation enhanced root biomass by 145% and promoted iron-plaque formation on root surfaces, immobilizing 88% of soluble arsenate and antimonate within the rhizosphere while restricting shoot translocation factors below 0.08. Dense vegetative cover reduced particulate dust emission fluxes by 91%, establishing a self-sustaining phytostabilization cap.
Keywords: phytostabilization; mine tailings; arsenic immobilization; antimony; plant growth-promoting rhizobacteria; ecological restoration
Manuscript Timeline: Received 23 May, 2026; Revised 16 June, 2026; Accepted 26 June, 2026; Published 30 June, 2026.
Citation: Morales, G., Ndlovu, C., and Dvorak, M. (2026). Microbiome-Assisted Phytostabilization of Arsenic- and Antimony-Contaminated Mine Tailings Using Native Metallophyte Grasses and Siderophore-Producing Rhizobacteria. Advanced Journal of Environmental Science and Technology, 17(6), pp. 363-375.
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 350-362, June, 2026
Research Article
Photocatalytic Nitrogen Fixation to Green Ammonia Using Defect-Engineered Bismuth Molybdate Nanosheets Under Ambient Sunlight and Water
Amira Hassan¹*, Wei-Lin Chen², Giovanni Conti³
¹Department of Chemistry, American University in Cairo, New Cairo, Egypt
²Department of Chemical Engineering, National Tsing Hua University, Hsinchu, Taiwan
³Department of Applied Science and Technology, Polytechnic University of Turin, Turin, Italy
Corresponding Author: Amira Hassan — [email protected]
Abstract
Decentralized solar-driven photocatalytic nitrogen fixation offers a zero-emission alternative to centralized fossil-fueled Haber-Bosch ammonia synthesis, yet sluggish dinitrogen (N≡N) triple-bond activation limits quantum efficiency. This study synthesizes ultrathin bismuth molybdate (Bi2MoO6) nanosheets enriched with sulfur-substituted oxygen vacancies that act as dual electron-donating and N2-chemisorption centers. Under simulated AM 1.5G solar irradiation in pure water without sacrificial organic hole scavengers, the catalyst achieved an ammonia synthesis rate of 218 μmol/g/h with a solar-to-ammonia conversion efficiency of 0.42% and 98% selectivity over hydrazine. Isotopic 15N2 labeling coupled with in situ diffuse reflectance infrared Fourier-transform spectroscopy confirmed an associative alternating hydrogenation pathway, maintaining stable catalytic turnover across 100 hours of continuous illumination.
Keywords: photocatalytic nitrogen fixation; green ammonia; defect engineering; bismuth molybdate; solar fuels; sustainable fertilizers
Manuscript Timeline: Received 22 May, 2026; Revised 15 June, 2026; Accepted 25 June, 2026; Published 30 June, 2026.
Citation: Hassan, A., Chen, W.-L., and Conti, G. (2026). Photocatalytic Nitrogen Fixation to Green Ammonia Using Defect-Engineered Bismuth Molybdate Nanosheets Under Ambient Sunlight and Water. Advanced Journal of Environmental Science and Technology, 17(6), pp. 350-362.
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 324-336, June, 2026
Research Article
Electrospun Metal-Organic Framework/Polyacrylonitrile Nanofiber Membranes for High-Efficiency Capture of Radioactive Iodine Vapor from Nuclear Off-Gas Streams
Jian-Wei Zhou¹*, Katarzyna Kowalska², Benjamin Foster³
¹School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an, China
²Department of Chemical Technology, Warsaw University of Technology, Warsaw, Poland
³School of Chemistry, University of Melbourne, Melbourne, Australia
Corresponding Author: Jian-Wei Zhou — [email protected]
Abstract
Volatile radioactive iodine isotopes (129I and 131I) generated during nuclear fuel reprocessing require high-capacity, moisture-resistant sorbents capable of operating under humid off-gas conditions without silver-zeolite degradation. This study fabricates flexible nanofiber membranes via electrospinning bismuth-thiolate-functionalized ZIF-8 metal-organic frameworks embedded within hydrophilic-hydrophobic balanced polyacrylonitrile fibers. Under dynamic breakthrough testing at 75 °C and 80% relative humidity, strong chemisorptive Bi–I coordination bonds yielded an iodine capture capacity of 642 mg/g with a decontamination factor exceeding 10^4. X-ray photoelectron spectroscopy confirmed irreversible formation of stable bismuth oxyiodide phases, preventing thermal or aqueous leaching during long-term geological waste immobilization.
Keywords: radioactive iodine capture; nuclear off-gas treatment; metal-organic frameworks; electrospun nanofibers; chemisorption; nuclear waste safety
Manuscript Timeline: Received 19 May, 2026; Revised 13 June, 2026; Accepted 23 June, 2026; Published 30 June, 2026.
Citation: Zhou, J.-W., Kowalska, K., and Foster, B. (2026). Electrospun Metal-Organic Framework/Polyacrylonitrile Nanofiber Membranes for High-Efficiency Capture of Radioactive Iodine Vapor from Nuclear Off-Gas Streams. Advanced Journal of Environmental Science and Technology, 17(6), pp. 324-336.
Advanced Journal of Environmental Science and Technology | Vol. 17 (6), pp. 337-349, June, 2026
Research Article
Wildfire Smoke Plume Aging and Secondary Organic Aerosol Formation: Airborne Measurements and Box Modeling Across Boreal Forest Fires
Emily MacPherson¹*, Anders Solberg², Yuki Watanabe³
¹Department of Earth and Atmospheric Sciences, University of Alberta, Edmonton, Canada
²Norwegian Institute for Air Research, Kjeller, Norway
³Department of Earth and Planetary Science, University of Tokyo, Tokyo, Japan
Corresponding Author: Emily MacPherson — [email protected]
Abstract
Intensifying boreal wildfires inject massive quantities of primary organic aerosol and volatile organic compounds into the troposphere, yet chemical evolution during multi-day atmospheric transport remains poorly parameterized in climate-air quality models. Using instrumented research aircraft equipped with high-resolution aerosol mass spectrometers and proton-transfer-reaction mass spectrometers, this study tracked Lagrangian smoke plumes up to 72 hours downwind of crown fires in western Canada. Daytime hydroxyl-radical photo-oxidation of phenolic and furanoid precursors doubled oxygenated secondary organic aerosol (SOA) mass within 12 hours while forming light-absorbing brown carbon chromophores that altered regional radiative forcing. Incorporating parameterized phenolic oxidation kinetics into a regional chemical transport model reduced surface PM2.5 prediction bias by 37% across downwind metropolitan areas.
Keywords: wildfire smoke; secondary organic aerosol; brown carbon; atmospheric aging; boreal forests; air quality modeling
Manuscript Timeline: Received 20 May, 2026; Revised 14 June, 2026; Accepted 24 June, 2026; Published 30 June, 2026.
Citation: MacPherson, E., Solberg, A., and Watanabe, Y. (2026). Wildfire Smoke Plume Aging and Secondary Organic Aerosol Formation: Airborne Measurements and Box Modeling Across Boreal Forest Fires. Advanced Journal of Environmental Science and Technology, 17(6), pp. 337-349.